‹
›
‹
›
Molecular Weight:56.11
Other Names: Caustic potash
CAS No.:1310-58-3
EINECS No.:215-181-3
Grade Standard:Industrial Grade
Appearance:Flake
Purity:90%
Solubleness:Soluble Alkali
Packing:25kg/bag
HS Code:2815200000
DETAILS
Potassium hydroxide KOH 48% Liquid or 90% 95%Flakes (chemical formula :KOH, formula :56.11) white powder or flake solid. The melting point was 360~406ºC, the boiling point was 1320~1324ºC, the relative density was 2.044g/cm, the flash point was 52°F, the refractive index was N20 /D1.421, the vapor pressure was 1mmHg(719ºC). Highly alkaline and corrosive. Very easy to absorb moisture in the air and delirium, absorb carbon dioxide and become potash. Soluble in about 0.6 parts hot water, 0.9 parts cold water, 3 parts ethanol and 2.5 parts glycerin. A great deal of heat is produced when dissolved in water, alcohols, or treated with acids. The pH of 0.1 molar solution is 13.5. Medium toxicity, half of the lethal dose (rats, through the mouth)1230mg/kg. Soluble in ethanol, slightly soluble in ether. It is highly alkaline and corrosive, and its properties are similar to caustic soda.
Product Information:
Nature: White or slightly yellow bean shaped particles, rods, or blocks. Melting point approximately 360 ºC, d 2 044. 380 ºC is anhydrous. It is highly hygroscopic and deliquescent in the air, absorbing carbon dioxide to form potassium carbonate. Dissolve in 0.9 parts of water, 0.6 parts of boiling water, 3 parts of ethanol, and 2.5 parts of glycerol, while releasing a large amount of heat. Insoluble in ether. The pH value of the Imol/L aqueous solution is 13.5. Non combustible and highly corrosive. When exposed to water and steam, a large amount of heat is released, forming a corrosive solution. Neutralize with acid and release heat.
Executive standards:GB/T 1919-2014
Product specification:
Application:
1. Used for electroplating, engraving, lithography, etc.2. Used as raw materials for potash production, such as potassium permanganate, potassium carbonate, etc.
3. In the pharmaceutical industry, it is used in the production of potassium boron, borohydrogen, spironolactone, salarinostol, testosterone propionate, progesterone, vanillin, etc.
4. Used in light industry for the production of potassium soap, alkaline batteries, cosmetics (such as cold cream, alabaster and shampoo).
5. In the dye industry, it is used to produce vat dyes, such as reduced blue RSN.
6. Used as an analytical reagent, saponification reagent, absorbent of carbon dioxide and water.
7. In the textile industry, it is used for printing and dyeing, bleaching and mercerizing, and is widely used as the main raw material for the manufacture of artificial fibers and polyester fibers, and is also used in the manufacture of melamine dyes.
8. It is also used in metallurgical heating agent and leather degreasing and other aspects.
COMPANY PROFILE
Shandong Zhongfuji New Material Co., Ltd. is located in Jinan, capital of Shandong Province. Jinan is connected with the capital economic circle to the north and the Yangtze River Delta Economic Circle to the south. East and west connect Shandong Peninsula and central China. Shandong Zhongfuji New Material Co., Ltd. is a chemical trading company specializing in the integration of production, processing and international sales. The company introduced advanced scientific and technological achievements at home and abroad, with domestic and foreign well-known manufacturers of superior products. Its basic functions are: 1. Domestic trade of all kinds of chemical raw materials; 2. Price Information Service and chemical raw materials procurement for industrial companies. At present, the company is trade-based, industrial-based, global procurement, global sales, domestic and foreign trade integration, upstream and downstream integration, global traders with integrated value-added capabilities and compound competitiveness made steady progress.
Our main products are: agricultural chemicals series, polymer series, organic raw materials series, coatings and paint series, pharmaceutical and biochemical industry, organic solvents and additives series, plastics and products series, food and feed additives series, nylon chips, calcium chloride, octanol, water reducer, hydroxyethyl methacrylate, hydroxyethyl methacrylate, hydroxyethyl methacrylate and more than 800 varieties, etc. , at the same time operating domestic and foreign well-known chemical products, including basic chemical raw materials, Surfactant and more than 300 varieties; Customers have been all over Southeast Asia, the Middle East, Europe, , Australia and in cooperation with these companies to form a long-term good strategic relations.
Shandong Zhongfuji New Material Co., Ltd. Based on the principle of “Customer first, quality first”, we provide our customers with excellent service and high-quality products, and has a very high market share, products sold in all regions of the world. "Science and technology first, quality-oriented, customer first, honesty and trustworthiness" is Fji's corporate philosophy. The company has always been to customer demand as the direction of our efforts, and constantly strive to work hard, constantly open up, to the Green, environmental protection, high-tech goals. The company is willing to sincerely serve you, embrace the heart of gratitude to further serve the old rain new knowledge, innovative research and development, the introduction of more innovative and advanced products, more powerful application of Technology Services World Enterprises, join hands to build a bright future.
SERVICE
1. Purity, Package, Mark, thiry party test (SGS,BV,Intertek,CIQ)
2. Sample order are acceptable
3. reply you for your inquiry asap within 12 hours
4. Cargoes photo before and after loading into container will be sent to you by email
5. Guaranteed delivery time
6. Full experience in this field
7. Good cooperation with cargo agents and shipping companies
8. professional sales and engineers will solve the problem you concern
FAQ
Q: Are you a factory or trading company?
A: Yes,we are factory, but not only factory, we also have sales team, own designers, own showroom, can help buyers to decide which products are their suitable choice, and all your inquiry will be replyed within 24 hours.
Q: Could you send me all your catalogues and price list?
A: As we have more than thousands of items, even 1 item have different size and package, it is really hard to send you all our catalogue and price list for you. Please inform me the items, size and packages you are interested in, so we can offer you the price list you need for your reference .
Q: Can I get some samples for testing?
A: we are honored to provide samples, the shipping cost should be paid by customers at first. And it will be returned to you in our first time cooperation.
Q; How does your factory do regarding quality control?
A: Our factory has passed ISO9001 2008, REACH, FAMIQS Certificate.
Q: What's your Delivery Time?
A: In generally, the delivery time is 5 days-15 days after receiving payment. For large quantity it will be checked with
production dept. We will make the delivery as soon as possible with the guaranted quality.
Q: What is payment terms?
A: L/C, T/T, Western Union are all accepted, and if you have better idea, please feel free to share with us.
Q: Which documents can you supply?
A: We usually provide our customers with Commercial Invoice, Price List, Packing List, COA, Origin Certificate, Quality/Quantity Certificate, Beneficary's Certificate, MSDS, B/L and others as your request.
If you have any questions, we will sincerely answer for you!
Recommended Products
